|
USED
EQUIPMENT AVAILABLE |
|
Bunch Re-Insertion Processor 18" Wide - 50" Unwind (Bunch Tight Web 629) |
FOLDERS:
Bunch Multi-stream Ticket/Label Folder
Bunch 3 Stream, single head, inline folder system.
It will be totally re-conditioned and factory re-certified.
Bunch 10” 590 Series Folder
Factory rebuilt and re-certified.
Running Adjustment, New Electronic Counter for motorized delivery table.
Press Hookups Optional
Bunch 20" 500 Series Folder
Factory Re-built and re-certified
Running Adjustment, Electronic Counter and motorized delivery table.
Pack Assist
Press Hook-ups Optional
Bunch 20” 1000 Series Folder
To be Factory re-built and re-certified.
Running Adjustment, Electronic Counter and Motorized Delivery Table
Pack Assist
Press Hookups Optional
BESTE 128 Folder/Job Separator, loop control for use with host
equipment.
We have one Folder Job Separator which can be run as a folder only or
it
Can cut the web after a certain number of folds. This units originally
sold for
$65,000 US, but was never used due to a plant closing. It is available
for
less than a third of its original cost.
One Pin Fed Loop Control Bunch Folder Model 128 Mod E
more info -
Contact us for suitability for your application.
UNWINDS:
BESTE Model 512 Unwind-
- Loop Control for loose web operation to Host equipment
- 3" Air Shaft
- 50" Diameter Roll Capacity for up to 18" Wide Forms
UNWIND/REWIND:
Model 516
Surface Driven Unwind Rewind Loop Control
Easy changeover from unwind to rewind by flipping
a switch and re-webbing.
Specifications (pdf file size: 175K)
REWINDS:
BESTE Model 516 Unwind/Rewind (see above)
BESTE Model 511 Rewind
- Loop Control for loose web operation to host equipment
- 50" Roll Diameter. 3" air core shaft
TRIMMER CUTTER STACKERS:
BESTE Model 222 loop controlled Trimmer Cutter Stacker for loose webhost equipment. Pinfed Cut-offs from 6" to 14" in increments of 1/6th inch. Speeds to 275 FPM
BESTE Model 222 loop controller Trimmer Cutter Stacker for loose web
host equipment, no pinfeeds required. Unit has a Bunch 910 Electronic Registration Module attached. Cutoffs from 6" to 14" in increments of 1/6th inch. Speeds to 300 FPM.
Sheeter
Bunch 7" to 14" Rotary Shear Cut Sheeter
-Tight Web
Electronic Registration Modules
Model 910 Electronic Registration Module
Creates tight, registered web for pinless paper and provides motor and
controller for down stream pinless devices such as punch and perf processors,
folders, sheeters
Processor Section
Punch and Perf Processor
Adds line holes, cross perforations, running perforations to the web.
Can add file holes, punch patterns, with optional tooling.
IMPRINTERS:
2 Color Loop Controlled 11" Fixed Position Imprinter
3 Color Loop Controlled 22" Fixed Position Imprinter
SHORT RUN EQUIPMENT:
Imprinter (Pack to Pack Variable Size for 11" and 14") (Taiyo_
PAPER PROCESSORS FOR PRODUCTION
OF BASE STOCK:
Bunch Micro Processor 18" Wide
MISCELLANEOUS (FOR BUNCH PROCESSORS)
1. Mini
16" X-Perf Insert
11" X-Perf Insert
14" X-Perf Insert
2. 1000
22" File Hole Insert (20" Wide) (No Rings)
17 X 26 File Hole Insert (2 Sets Rings)
USED SCHRIBER CUT-OFF/CROSS PERF CYLINDERS
1 - 17" Anvil Insert with trim unit & 5 equal 3-1/4" spacing
with 3/4" drop out
1 - 17" 3-4 around with trim unit
3 - 21" 4-6 around with trim unit
1 - 25-1/2" 8" around with hole No trim unit
COLLATORS:
Schriber Impactor Unit
22" FH Punch Unit
MISCELLANEOUS:
Assorted Punch & Die Cams and Rings
Schriber 34 x 26 Double X-Perf Unit (common anvil)
Stevens 26" MS-1000 Dry Offset Printing Cylinders
(1) 22" Magnetic Cylinder, Plate
(2) (1) 22" Cylinder, Blanket (stick on)
(With gears)
Stevens MS-4000
22 x 31 Insert with Upper & Lower Truck
20" Wide Upper & Lower Trucks
DG CN Unit (partial)
24" X-Perf Head
All equipment
is offered "as is, where is" and is offered subject to prior sale.